Drafting Workbench
OBJECTIVE: To create the 2D Drafting-Sheet with Title Block and Frame from the Solid CATpart created using Boolean Operation. DRAWING ONE:- 2D MODEL IN VARIOUS ORIENTATIONS: 1. FRONT VIEW: 2. TOP VIEW: 3. SECTION VIEW: 4. ISOMETRIC VIEW: FRAME AND…
Sagar Biswas
updated on 15 Nov 2022
OBJECTIVE: To create the 2D Drafting-Sheet with Title Block and Frame from the Solid CATpart created using Boolean Operation.
DRAWING ONE:-
2D MODEL IN VARIOUS ORIENTATIONS:
1. FRONT VIEW:
2. TOP VIEW:
3. SECTION VIEW:
4. ISOMETRIC VIEW:
FRAME AND TITLE BLOCK:
WORKING VIEW:
1. WITH RESPECTIVE VIEWFRAMES:
2. WITHOUT ANY VIEWFRAMES:
FINAL OUTPUT DRAFTING SHEET AFTER CONVERTING INTO PDF FORMAT:
LINK FOR THE PDF FILE:
https://drive.google.com/file/d/16YaPorvSjiGwNjtt3JXTtGA32A48QlXW/view?usp=sharing
DRAWING TWO:
2D MODEL IN VARIOUS ORIENTATIONS:
1. FRONT VIEW:
2. TOP VIEW:
3. SECTION VIEW:
4. ISOMETRIC VIEW:
WORKING VIEW:
1. WITH RESPECTIVE VIEWFRAMES:
2. WITHOUT ANY VIEWFRAMES:
FINAL OUTPUT DRAFTING SHEET AFTER CONVERTING INTO PDF FORMAT:
LINK FOR THE PDF FILE:
https://drive.google.com/file/d/145tuTBk0mGlVCdMzmr57odoin2gfWSqo/view?usp=sharing
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Be the first to add a comment
Read more Projects by Sagar Biswas (27)
A pillar Design with Master Section
OBJECTIVE: To create the A-Pillar's Plastic component from the given Class A Surface using the Master Section that is provided while following all the design rules. INTRODUCTION: Types of Pillars and their importance in the Automotive Industry:- These pillars standing at the vertical or near-vertical…
16 Feb 2023 04:08 PM IST
Coin Holder Design
OBJECTIVE: To create the Coin Holder's Plastic component using the Class A Surface that is provided. Firstly, we have to create the required Tooling-Axis for the given Class A Surface while meeting the requirements of the necessary Draft Angle & then perform the Draft-Analysis Operation…
14 Feb 2023 09:08 AM IST
Bumper Design
OBJECTIVE: To create the Bumper's Plastic-Component using the Class A Surface that is provided. Desired Thickness of the Plastic Component is 3mm with 3 degrees as the Draft Angle. Firstly, we have to create the required Tooling-Axis for the given Class A Surface while meeting the requirements…
10 Jan 2023 09:15 AM IST
Base Bracket Design
OBJECTIVE: To create the Base-Bracket's Plastic Component using the Class A Surface that is provided. Firstly, we have to create the required Tooling-Axis for the given Class A Surface while meeting the requirements of the necessary Draft Angle & then perform the Draft-Analysis Operation on the…
10 Jan 2023 09:15 AM IST
Related Courses
0 Hours of Content
