Menu

Executive Programs

Workshops

Projects

Blogs

Careers

Placements

Student Reviews


For Business


More

Academic Training

Informative Articles

Find Jobs

We are Hiring!


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Loading...
Executive Programs
Workshops
For Business

Success Stories

Placements

Student Reviews

More

Projects

Blogs

Academic Training

Find Jobs

Informative Articles

We're Hiring!

phone+91 9342691281Log in
  1. Home/
  2. Rajendra Prasad/
  3. Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

Aim:- To create bar bending schedule, different door types and creation of standard drawing template Introduction:- Bar bending schedule are used to know the distance of the bar so that it sis easy to cut the reinforced bars easily at that length Door is one of the important material for the builiding when we draw a door…

    • Rajendra Prasad

      updated on 02 Aug 2022

    Aim:- To create bar bending schedule, different door types and creation of standard drawing template

    Introduction:-

    • Bar bending schedule are used to know the distance of the bar so that it sis easy to cut the reinforced bars easily at that length
    • Door is one of the important material for the builiding when we draw a door along with its name (MD,D1,D2) which has a diiferent schedules its easy during the construction time
    • Standard drawing templates are very essential during the construction projects 
    • These drawing templates involved the name of the architect, SBC of the soil, construction time, name of the client, adress, etc.,

    AutoCAD:-

    It is essential to draft the geometry

    The different tools required in this drafts are line(L), rectangle(REC), construction line  (XL), text(MTEXT), fillet (F), offset (O), Hatching (H) Hatch edit (HE), Block(B), Extend (EX), Insert(I).

    Procedure:-

    • Go to start menu, click on Start drawing
    • Type stratup (Enter) in command line 
    • Enter the new value of start up:1
    • Go to application menu and select new or type new in command line
    • In the "create new drawing" dialogue box contains imperial  type of systems and metric type of system 
    • We select the metric system in the "start from scratch" option
    • After that in Advance setup option select the decimal unit system in the units 

    The above procedure should be followed every time when the new sheet is opened 

                                   

                                   Entering the start up command in the command line       

                

                                 

                                 Entering the value 1 for the start up

     

                                        

                                When we go to the new file then we get this file select the metric from start from scratch

                  

                                

                               Then advance setup setting should be done by clicking OK 

     

                                     

                              Keep the units in decimal and adjust precision then click next            

     

                               

                               Keep angle in decimal degree and adjust precision then click next

     

                                 

                              Select the angle measurement in east and click on next                    

                              

                                Select angle direction in counter clockwise and click on next

     

                               

                               Keep the width as 12m and length of 9m as default and click on finish

     

    Aim:- To darft the tempalte custom1, title block 

                                           

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a offset of 2020mm from xl line in +ve x-direction
    • Take a offset of 1320mm from the xl line in -ve y-direction
    • Take a offset of 250mm, 70mm, 70mm, 70mm, 70mm, 70mm, 300mm, 70mm, 70mm, 70mm, 70mm, 70mm, 70mm from the xl line, 250mm line, 70mm line, 70mm line, 70mm line, 70mm line, 70mm line, 300mm line, 70mm line, 70mm line, 70mm line, 70mm line, 70mm line respectively in -ve y-direction
    • Take a offset of 100mm, 1660mm, 100mm, 160mm in +ve-x direction for a 4 lines
    • Use a trim command to trim off the unwanted lines
    • Take a offset of 1760mm, 260mm from xl line in +ve x- direction
    • Use a trim command to trim off the unwanted lines
    • Take a offset of 805.3mm, 400mm, 554.7mm, 260mm from the xl line in +ve x- direction
    • Use a trim command to trim off the unwanted lines
    • Insert the text inside the lines by using a multitext (MTEXT) in the command
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

    Layers used for the templates are 

    • Template custom 1 - ACI 40
    • Template custom 2 - ACI 241

                                       Layers used for templates

     

    Result:-

     

     

    Aim:- To darft the tempalte custom2, title block 

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a offset of 1990mm, 70mm, 200mm, 100mm, 160mm from xl line in +ve x-direction
    • Take a offset of 350mm from the xl line in -ve y-direction
    • Trim off the 1990mm offset line Use a trim command to trim off the unwanted lines
    • Take a offset of 1469.3mm, 200mm, 250mm, 600.7mm from the xl line in +ve x-direction
    • Take a offset of 150mm from the 350mm line in -ve y-direction
    • Take a offset of 1269.3mm, 200mm, 200mm, 250mm, 600.7mm from the xl line in +ve x-direction
    • Take a offset of 150mm from the 350mm line in -ve y-direction
    • Trim off the unwanted lines 
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

    Layers used for the templates are 

    • Template custom 1 - ACI 40
    • Template custom 2 - ACI 241

                                       Layers used for templates

     

    Result:-

     

     

    Aim :- To draft the door type door 1 by using AutoCAD

                                           

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a rectangle by using a command REC having a size of 2330mmX2750mm 
    • Take a offset of 10mm from the created rectangle 
    • Use a X command to explode the lines in the rectangle 
    • Take a offset of 583mm from the outer rectangle which is exploded.Then offset it 4 times in +ve x-direction
    • Take a offset of 10mm left and right from the every 583mm distance line
    • Take a offset of 900mm from the outer rectangle from the top in -ve y-direction
    • Create a door by using a rectangle REC having a dimension 400mmx700mm
    • Take a offset of 25mm inwards from the 400x700mm rectangle
    • Again take a offset of 50mm inwards from the 25mm rectangle
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block
    • After making as a block use a copy command to copy the block object 
    • Place it as a 4x3 4 is in horizontal direction and 3 is in vertical direction 

    Layers used for door type drawings are

    • D1 - ACI 31
    • D2 - ACI 11
    • Dimensions - Yellow
    • Text - Cyan

                                                             Layers for door types

     

    Result:-

                                         

     

     

    Aim :- To draft the door type door 2 by using AutoCAD

                                              

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a rectangle by using a command REC having a size of 2330mmX2750mm 
    • Take a offset of 10mm from the created rectangle 
    • Use a X command to explode the lines in the rectangle 
    • Take a offset of 583mm from the outer rectangle which is exploded. Then offset it 4 times in +ve x-direction
    • Take a offset of 10mm left and right from the every 583mm distance line
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

    Layers used for door type drawings are

    • D1 - ACI 31
    • D2 - ACI 11
    • Dimensions - Yellow
    • Text - Cyan

                                                             Layers for door types

     

    Result:-

     

     

     

    Aim:- To draft the symbols legend by using a AutoCAD

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a offset of 160mm, 650mm, 160mm, 650mm, 160mm, 650mm from xl line in +ve x-direction
    • Take a offset of 100mm, 60mm, 60mm, 60mm, 60mm, 60mm, 60mm, 60mm,45.7mm, 104.4mm from the xl line in -ve y-direction
    • Use a trim command to trim off the unwanted lines
    • Insert the text inside the lines by using a multitext (MTEXT) in the command
    • Make a block of the symbols
    • For example:- To draw the single gang switch use a circle command and draw the circle having the radius 10mm then draw a inclined line at 45 degree having a distance 40mm and draw the line of 10mm at the free end
    • Draw the other symbols like this
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block 
    • Place the block symbols withrespect to their name

                                         

                                                               Block for single gang switch

    Layers used for this drawings are

    • Outer line - Red 
    • Symbols - ACI 20
    • Text - Cyan
    • Dimension - Yellow

                                                                  Layers for symbols legends

     

    Result:-

     

     

     

    Aim:- To draft the door type for residential building

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Engineering (inches and feet's)
    • Select the rectangle tool by entering REC (Enter) in the command line
    • Also use the line tool by entering the L (Enter) in the command line  

    To get the D1

    • Draw a rectangle by using a command REC having a size 2'-10" x 6'-11"
    • Take a offset of 1" from the 2'-10" x 6'-11" rectangle 
    • Again take a offset of 1" from the 1" offset rectangle
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a rectangle having size 3"x10" to create the lock in the door
    • In that rectangle draw a another rectangle having a size 6"x1.5" to create the handle 
    • Draw a circle inside the 3"x10" rectangle having a diameter 2"
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                 

                                                                                   Resident D1

    To get the D2

    • Draw a rectangle by using a command REC having a size 3'-4" x 6'-11"
    • Take a offset of 1" and 0.5" from the 3'-4" x 6'-11" rectangle respectively 
    • Draw a rectangle having a size 2'-5"x3'-2.7" at the top
    • Take a offset of 0.5" and 0.5" from the 2'-5"x3'-2.7" rectangle respectively
    • Create a another rectangle inside the 2'-5"x3'-2.7" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x4  3 is in horizontal direction and 4 is in vertical direction 
    • Draw a rectangle having a size 2'-5"x2'-0" at the bottom
    • Take a offset of 0.5", 0.5", 0.5" from the 2'-5"x2'-0" rectangle respectively
    • Again take a offset of 3" and 0.5" from the last offseted 0.5" rectangle 
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a circle between the top and bottom rectangle having a diameter 2"
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                               

                                                                                      Resident D2

    To get D3

    • Draw a rectangle by using a command REC having a size 2'-9" x 6'-11"
    • Take a offset of 0.5", 1.5", 0.5", and 1" respectively from the 2'-9" x 6'-11" rectangle 
    • Draw a rectangle inside the 2'-9" x 6'-11" rectangle having a size 1'-8"x10"
    • Take a offset of 1" from the 1'-8"x10"rectangle 
    • Hatch the inside portion 
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a rectangle having size 3"x10" to create the lock in the door
    • In that rectangle draw a another rectangle having a size 6"x1.5" to create the handle 
    • Draw a circle inside the 3"x10" rectangle having a diameter 2"
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                  

                                                                                  Resident D3

     

    To get the D4

    • Draw a rectangle by using a command REC having a size 3'-4" x 6'-11"
    • Take a offset of 1" and 0.5" from the 3'-4" x 6'-11" rectangle respectively 
    • Draw a rectangle having a size 2'-5"x3'-2.7" at the top
    • Take a offset of 0.5" and 0.5" from the 2'-5"x3'-2.7" rectangle respectively
    • Create a another rectangle inside the 2'-5"x3'-2.7" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x4  3 is in horizontal direction and 4 is in vertical direction 
    • Draw a rectangle having a size 2'-5"x2'-4.8" at the bottom
    • Take a offset of 0.5" and 0.5" from the 2'-5"x2'-4.8" rectangle respectively
    • Create a another rectangle inside the 2'-5"x2'-4.8" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x3  3 is in horizontal direction and 3 is in vertical direction 
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a circle between the top and bottom rectangle having a diameter 2"
    • Make a curve at the inside portion having a radius value 7.6" at left and right sides in the panel
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                              

                                                                                   Resident D4

     

    To get the D5

    • Draw a rectangle by using a command REC having a size 3'-4" x 6'-11"
    • Take a offset of 1" and 0.5" from the 3'-4" x 6'-11" rectangle respectively 
    • Draw a rectangle having a size 2'-5"x3'-2.7" at the top
    • Take a offset of 0.5" and 0.5" from the 2'-5"x3'-2.7" rectangle respectively
    • Create a another rectangle inside the 2'-5"x3'-2.7" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x4  3 is in horizontal direction and 4 is in vertical direction 
    • Draw a rectangle having a size 2'-5"x2'-4.8" at the bottom
    • Take a offset of 0.5" and 0.5" from the 2'-5"x2'-4.8" rectangle respectively
    • Create a another rectangle inside the 2'-5"x2'-4.8" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x3  3 is in horizontal direction and 3 is in vertical direction 
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a circle between the top and bottom rectangle having a diameter 2"
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                          

                                                                          Resident D5

     

    To get the D6

    • Draw a rectangle by using a command REC having a size 3'-4" x 6'-11"
    • Take a offset of 1" and 0.5" from the 3'-4" x 6'-11" rectangle respectively 
    • Draw a rectangle having a size 2'-5"x3'-2.7" at the top
    • Take a offset of 0.5" and 0.5" from the 2'-5"x3'-2.7" rectangle respectively
    • Create a another rectangle inside the 2'-5"x3'-2.7" rectangle having a dimension 8"x8"
    • Take a offset of 0.2" from the  8"x8" rectangle
    • Place it as a 3x4  3 is in horizontal direction and 4 is in vertical direction 
    • Make a curve at the inside portion having a radius value 7.6" at left and right sides in the panel
    • Draw a rectangle having a size 2'-5"x2'-0" at the bottom
    • Take a offset of 0.5", 0.5", 0.5" from the 2'-5"x2'-0" rectangle respectively
    • Again take a offset of 3" and 0.5" from the last offseted 0.5" rectangle
    • Use a explode option to explode the rectangle into line
    • Trim off the bottom line by using a command TR enter
    • Draw a circle between the top and bottom rectangle having a diameter 2"
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                         

                                                                                      Resident D6

     

    Layers used for this drawings are

    • D1 - Red
    • D2 - Green
    • D3- ACI 40
    • D4 - Magenta
    • D5 - ACI 20
    • D6 - ACI 11
    • Dimension - Yellow
    • Text - Cyan

     

     

    Result:-

                                                             All doors D1,D2,D3,D4,D5,D6

     

     

     

    Aim:- To draft the shape of the barbending schedule by using a AutoCAD

    Procedure:-

    By using direct distance entry method

    • Here all the units are in Decimals (milimeter)
    • Select the construction line tool by entering XL (Enter) in the command line
    • Select the vertical line and place it any where on the screen
    • Next by using a same command (construction line) select horizontal line and place it on the screen
    • Take a offset of 300mm, 1000mm, 300mm, 200mm, 500mm, 500mm, 500mm from xl line in +ve x-direction
    • Take a offset of 160mm, 250mm, 250mm, 250mm, 250mm, 250mm from the xl line in -ve y-direction

    To get A type

    • Draw a line by using a command L having a length 750mm and draw a 18mm upwards then left wards at each ends
    • Take fillet command to provide a smooth curve at the edges the radius is 8mm
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                             Type  A drawing

                                     

                                                                             Type A block

     

    To get B type

    • Draw a line by using a command L having a length 390mm, draw inclination length 41mm at each ends of the line then draw a line having a distance 139mm at each end At last draw a 14.5mm down wards and right side at each ends
    • Take fillet command to provide a smooth curve at the edges the radius is 6mm
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                         Type B drawing

                                          

                                                                         Type B block

    To get C type

    • Draw a line by using a command L having a length 210mm, draw inclination length 41mm at each ends of the line then draw a line having a distance 180mm at each end At last draw a 14.4mm down wards and right side at each ends
    • Take fillet command to provide a smooth curve at the edges the radius is 6mm
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                           Type C drawing

                                          

                                                                            Type C block

    To get D type

    • Draw a line by using a command L having a length 750mm and draw a 11mm downwards then rightside at each ends
    • Take fillet command to provide a smooth curve at the edges the radius is 5mm
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                                Type D drawing

                                         

                                                                              Type D block

    To get E type

    • Draw a rectangle by using a rectangle command REC having a size 23mmx43mm
    • Take fillet command to provide a smooth curve at the edges the radius is 4mm
    • Make it as a block by using a block command B 
    • Then give a name for this block, pick a point of this drawing, then specify the object.
    • Click on the convert into block, uniform scaling, allow exploding then click on ok
    • Now the drawing what you selected is converted into the block

                                                                                 Type E drawing

                                                    

                                                                        Type E block

    Layers used for this drafts are

    • Outer line - Red 
    • Shapes - ACI 20
    • Text - Cyan
    • Dimension - Yellow

     

     

     

    Result:-

     

     

     

    Leave a comment

    Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.

    Please  login to add a comment

    Other comments...

    No comments yet!
    Be the first to add a comment

    Read more Projects by Rajendra Prasad (43)

    Week 3 Challenge

    Objective:

    Aim:- To provide the primary load cases fro design, defination for one way slab, unit weight of structural steel and soil, name of few sections, define primary beam. 1. 1. State the primary load cases to be considered for design. The primary load cases are  Dead load (IS 875:part 1) Live load (IS 85:part 2) Wind load (IS…

    calendar

    30 Nov 2022 10:59 AM IST

      Read more

      Week 2 Challenge

      Objective:

      Question1 Aim:- To provide the assigning the circular section, assign unit system, list of parammeters, list of code books, specifying the design compressive strength  1. How will you assign Circular section to column? Step1:-  First open the STAAd.Pro software by double clicking on it Then click on New then…

      calendar

      27 Oct 2022 10:07 AM IST

      • Bridges
      • Structural Analysis
      Read more

      Week 1 Challenge

      Objective:

      1.   1. Write the steps involved to upload a .std file through web mail? Open the STAAD software then click on share option availbale on the screen After clicking on the share option then click on the send mail option  To browse the .std file click on browse option Then click on send     2. Name…

      calendar

      03 Oct 2022 12:01 PM IST

      • Bridges
      • Structural Analysis
      Read more

      Project 2_Design & Analysis of a Hostel building at Guwahati, Assam

      Objective:

      Aim:- Analysis and design of hostel building at Guwahati, Assam by using ETABS model and SAFE model   Introduction:-   There are 2 types of foundation Shallow foundation Deep foundation Shallow foundation are of 5 types they are Isolated footing  Combined footing Strip footing Strap footing Raft or…

      calendar

      21 Sep 2022 06:57 AM IST

      • ETABS
      • HTML
      Read more

      Schedule a counselling session

      Please enter your name
      Please enter a valid email
      Please enter a valid number

      Related Courses

      coursecardcoursetype

      Accelerated Career Program in Embedded Systems (On-Campus) - Powered by NASSCOM

      Recently launched

      0 Hours of Content

      coursecard

      5G Protocol and Testing

      Recently launched

      4 Hours of Content

      coursecard

      Automotive Cybersecurity

      Recently launched

      9 Hours of Content

      coursecardcoursetype

      Pre-Graduate Program in Bioengineering and Medical Devices

      Recently launched

      90 Hours of Content

      coursecardcoursetype

      Pre-Graduate Program in 5G Design and Development

      Recently launched

      49 Hours of Content

      Schedule a counselling session

      Please enter your name
      Please enter a valid email
      Please enter a valid number

                  Do You Want To Showcase Your Technical Skills?
                  Sign-Up for our projects.