Week 10- Assembly Workbench

CV JOINT : 

TREE STRUCTURE :

CV JOINT OVERALL ASSEMBLY WITH CONSTRAIN GEOMETRY : 

CV JOIN ASSEMBLY PROCEDURE : 

•  to work on the assembly model, the part model of the each component is need to updated or  component should be created before moving to an assembly. 
• in this cv joint , there are three components are involved in the stage of assembly. 
• components are created using the part design option in catia v5. 
• after creating the part of all the three components, the reference geometry for the assemby is also created
• for example, axis system is used to concentric both the component, and plane is also used as the reference geometry for the assembly mates.
• after completion of the reference geometry, the new assembly workbench is needed to created.
• and copy all the required component and paste it in the new assembly work bench
• the primary or the parent component is need to fixed.
• then using the assembly constrait, need to arrest the required degree of freedom, to make a complete working component. 
• for this cv joint there is a total of 5 parts is need to created the complete assembly. the symmetry of body A.

QUICK RETURN MECHANISM : 

TREE STRUCTURE :

QUICK RETURN MECHANISM ASSEMBLY WITH CONSTRAIN GEOMETRY :

QUICK RETURN MECHANISM ASSEMBLY PROCEDURE : 

•  to work on the assembly model, the part model of the each component is need to updated or  component should be created before moving to an assembly. 
• in this quick return mechanism joint , there are five components are involved in the stage of assembly. 
• components are created using the part design option in catia v5. 
• after creating the part of all the five components, the reference geometry for the assemby is also created
• for example, axis system is used to concentric both the component, and plane is also used as the reference geometry for the assembly mates.
• after completion of the reference geometry, the new assembly workbench is needed to created.
• and copy all the required component and paste it in the new assembly work bench
• the primary or the parent component is need to fixed.
• then using the assembly constrait, need to arrest the required degree of freedom, to make a complete working component.