All Courses
All Courses
Understanding the concepts on Degrees of Freedom Q] A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental…
Manoj k
updated on 04 Sep 2022
Understanding the concepts on Degrees of Freedom
Q] A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived.
The fundamental period of vibration (T1 = 2 seconds) and its associated mode shape:
The second mode of vibration (T2 = 0.6852 seconds) and its associated mode shape:
The third mode of vibration (T3 = 0.4346 seconds) and its associated mode shape:
The fourth mode of vibration (T4 = 0.3383 seconds) and its associated mode shape:
The fifth mode of vibration (T4 = 0.2966 seconds) and its associated mode shape:
Ln , Mn and Γn for each of the five modes are to be computed from Equations below.
Also, calculate the effective modal mass Mn* and the modal mass participating ratio for the 5 modes. The mass matrix will be required to evaluate these parameters.
Finally, obtain the base shear for each of the 5 modes of vibration and the combined base shear as per SRSS rule. The pseudo acceleration design spectrum to obtain the base shear for each mode is provided below.
How many modes are to be considered such that a modal mass participating ratio of 90% is obtained?
AIM:-
PROCEDURE:-
RESULT:-
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Project 1
Development of structural system & framing plan of a Sample Precast building (G+ 6) in Bhopal, India as per Indian Structural codes. Collaboration of course content from week 01 - Week 06 Understanding of architectural layouts of the building Creating the load path of the various forces to foundation Developing the…
16 Feb 2023 07:06 AM IST
Project 2
Model of a membrane roof with cables. The modeling, form-finding and create the cutting patterns to the structure. Aim: To Model of a membrane roof with cables. The modeling, form-finding and create the cutting patterns to the structure. Procedure: Create a new project and enable form finding and cutting pattern options…
02 Feb 2023 02:12 PM IST
Project 1
Aim: To Perform Form-finding and structural analysis structure of multiple masts. Procedure: Open the RFEM software and input the required settings Set the units to metric system Tick the Form Finding option Insert the nodes at required locations Connect the lines with nodes Assign the Nodal Supports…
27 Jan 2023 12:44 PM IST
Project 2 - Review of Shear, Moment & Splice connections in StaadPro Connection Module
Q. Design and optimize typical shear, moment and Splice joints in Staad Connection module for the following structure modelled in staadpro. Generate Report. Design and optimize braced connection (use US standard connections) in RAM Connection. Structure: A 2D portal frame fixed support spanning 15m with a pitched…
19 Jan 2023 09:39 AM IST
Related Courses
0 Hours of Content