Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code

SKETCH OF G+1 FLOOR RESIDENTIAL PLAN , TO VAASTU SHASTRA 

AIM OF THE PROJECT :- 

To sketch a G+1 floor residential plan according to vastu shastra and list down the names of structural drawing  required to be provided to the site for construction.

To assume the size of structural elements [column , beam , slab ,etc ] and to calculate the loads from the members as per  IS code

 

 

 

Dimensions of ground floor plan

Living room – 3.60m x 5.85m

Kitchen room – 3.60m x 3m

Dining room – 3m x 3m

Master bed room – 4.3m x 3m

Bed room – 3m x 4.5m

Toilet – 3.25m x 1.2m

Bathroom – 2.4m x 1.2m

WC – 1.2m x 1m

 

 

Dimensions of first floor

Guest room – 4.3m x 3m

Study room – 3m x 3m

Bed room – 3m x 4.5m

Toilet – 3.25m x 1.2m

Bath room – 2.4m x 1.2m

WC – 1.2m x 1m

 

Other dimensions

• Thickness of internal wall – 0.15m(150mm)
• Thickness of external wall – 0.23m(230mm)
• Thickness of slab – 0.25m(250mm)
• Dimensions of column – 0.3m x 0.3m
• Dimensions of beam – 0.3m x 0.45m
• Height of the wall of each floor – 3m

Vastu shastra followed during planning is

• Entrance of the house is provided in the east direction which is the symbol of progress in life
• Living room is placed in north east direction
• Master bedroom is placed in south west position this direction brings good health and prosperity
• Kitchen id placed in south east direction
• Study room is placed in the east direction
• Stair case is placed at north-west corner
• Bathroom ,wc and toilet is placed in west direction

 

 

 

Concept of vastu

 

           N-W                                                         NORTH                                                       N-E

       Toilets                                                       valuable store                                           veranda

      Garage                                                       study room                                                pooja room 

     Guestroom                                         

 

               children bedroom                                BRAHMA                          children’s study room

WEST         Study room                                      STHAAN                            study room                    EAST           

 

Master bedroom                              

Dressing room                                       Dining room                                           kitchen 

Storeroom                                               Bedroom                                                Garage

     S-W                                                           SOUTH                                                 S-E

 

 

LIST OF DRAWINGS PROVIDED AT THE CONSTRUCTION PROJECT

• Centre line drawing
• Footing and column layout with reinforcement details
• Column schedule with reinforcement details
• Plinth beam layout with reinforcement details
• First floor beam layout with reinforcement details
• Lift pit and head room reinforcement details
• Floor plans
• Foundation plan
• Design drawings
• Block plan
• Roof slab layout
• Column layout
• Site plan
• Column sections
• Septic tank design
• Overhead water tank design
• Plinth beam sections
• Furniture plan
• Section drawing of buildings
• Plumbing details
• Electrification details

 

CALCULATION OF LOADS :-

A ) DEAD LOAD CALCULATIONS :-

1. Dead load of columns :-

Dimensions of column – 0.3m x 0.3m ( 300mm x 300mm)

Height of column = [slab thickness x 2 ] + [height of wall floor x 2]

                                = [0.25 x 2] + [3 x 2]

                                = 6.5m

Total volume of concrete = 0.3 x 0.3 x 6.5 = 0.585m³

Unit weight of concrete = 25 KN/m³[it taken as per IS 875 (part-1)]

Dead load of column = 25 x 0.585 = 14.56 KN

2 .Dead load of beams :-

Dimensions of beam = 0.3m x 0.45m (300mm x 450mm)

Total volume of concrete = 0.3 x 0.45 x 1= 0.135m³

Unit weight of RCC= 25KN/m³ [ taken from IS 875 (part-1)]

Dead load of beam = 25 x 0.135 = 3.375KN

3.Dead load of slab :-

Slab is always designed for the span of 1m

Hence assume size of slab as 1m x 1m

Thickness of slab = 0.25m

Density of RCC = 25KN/m³

Self weight of slab = 1 x 1 x 0.25 x 25 = 6.25KN

4.Dead load of walls :-

Dead load of external wall

Thickness of external wall = 0.23m(230mm)

Unit weight of brick wall = 20KN.m³

Height of the wall = 3m

Load of wall on beams = 3 x 0.23 x 20 = 13.8KN

 

Dead load of internal wall

Thickness of internal wall = 0.15m (150mm)

Unit weight of brick wall = 20KN/m³

Height of wall = 3m

Loads of wall on beam = 3 x 0.15 x 20 = 9KN

B ) LIVE LOAD CLACULATIONS :-

(according to IS875 part-2)

Bed room – 2KN/m³

Living room – 2KNm³

Bathroom – 2KN/m³

Terrace – 3KN/m³

Toilet – 2KN/m³

Stair case – 3KN/m³

Study room- 2KN/m³

Kitchen – 2KN/m³

C) WIND LOAD CALCULATIONS :-

 Wind load is designed only when the height of the building exceeds 10m

The height of designed building is 6.5m which is less than 10m

So, the calculation of wind load is not required .

RESULTS :-

• The plan prepared by the vastu shastra concept considering all the principles and considered of vastu shastra
• The load calculations are done as per the IS code considerations