Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

• Trim all the door openings with their respective width D1-3', D2-2'6", D3-3'3".
• For open kitchen, trim the line retaining a distance of 6'4" from right side of kitchen.
• Draw doors creating a hinge of 0.5" from the midpoint of both the wall, then drawing a circle with one point on the midpoint of one hinge and other the midpoint of another hinge.

• For living, take an offset of 1'3", this is where the window starts (as it is given)
• Using line command draw a line of 6' from the centre of offset line inside the wall thickness.
• Draw windows wherever necessary: from middle portion of a wall draw a line, from the midpoint of that line give the distance
• ie, the width of the window, then join the other side. w1-6' w2-4' v-2' Trim all the unwanted lines and fillet the corners with fillet radius zero. Command: "F"-select both the lines (fillet radius is zero by default)

• Offset a distance of 2' to make the kitchen slab.
• Draw the cupboard by creating a rectangle Command REC-specify base point-click on dimension -give dimension as 5' x 2'
• Copy the rectangle to another bedroom also

• From layer property- create new layer - create 8 layers each for wall, door, window, stairs, kitchen slab and cupboard.
• Name each layer as wall, door, window, stairs, kitchen slab dimensions, text and cupboard and give different colours, so that it can be identified separately.
• Select the objects and place it in respective layers.

Layout of Residential plan as shown :

• Creating circles
• Select metric units as the diamensions is in mm.
• Draw a circle with acommand "C"select a centre point and give the radius as 1398 mm.
• Draw another circle with same centre with radius 452mm.
• Draw an offset of 200 mm from the inner circle to determine the position of chairs.
• Draw lines along the diameter of the bigger circle.

• Draw a rectangle with command "REC giving dimensions as 400 mm and 200 mm.
• Draw an are with start-centre and end method with the end points and centre of the side (400mm) of rectangle.
• Draw another rectangle of 55mm x100mm for the handle of the chair Command: "REC"-select the base point and click on dimension ana give as 55mm and 100mm.
• Copy it on the other side so that both handles are formed.
• Fillet the corner of rectangle by 50mm Command O- give the fillet radius as 50mm and select the two lines and trim off the unwanted
• line.
• Move the chair and place it such a way that it touches the offset 200mm circle. By using Command "M-select the base point and move it
• Mirror the chair to the opposite side Command MI select the base point and draw the reference line where we need to mirror. Rotate the chair and move it so that the chair in left side is created Command "RO-select the base point and rotate to desired angle
• Again mirror the chair so as to create chair in right side

Delete extra linen and offset of the circle

Final  plan for an outdoor canopy

• From toilet after offset of 100mm, give another offset of 832mm and trim to form the door opening by creating 12.5 mm hinge and then draw circle to the midpoint of other side of wall Trim off the rest of circle to form an arc
• Draw window of 728mm in the utility room and a ventilator of 631 mm in toilet room.
• Draw the duct shown behind the toilet room by offset at a distance of 201 mm and 150mm wall thick ness upwards.
• Extend the wall of toilet towards it and offset 402 mm offset wall thickness as 150mm.
• Fillet the corners of the room.

• In the command line enter DS and select en-us-home utility-select the symbols by draging them into Auto Cad screen and place whereever required

Final plan for the toilers and utilities room.