Benchmarking

      UNDER BODY COATING:        We all are aware of the fact that the underbody of the previous models was made from durable metals such as steel, which is easily damaged and oxidized, forming rust While you are sitting on the driving seat enjoying the smooth ride, the underbody of your…

Ans :-    BENCHMARKING Benchmarking is a process of measuring the performance of a compititors products, services, or processes against those of another business considered to be the best in the industry. The point of benchmarking is to identify internal opportunities for improvement. By studying companies with superior…

Ans :-             Create a product file and navigate to the Electrical Harness Flattening for wire harness flattening option and save it in the same location where the wire harness or routing assembly is stored. Define the 'Harness flattening parameters' in order to flatten the required…

ans :-      The objective of this project is to first route the two Harness A and Harness B as per the given harness layout.    The electrical connectors are represented by numbers in the above figure. There are 8 different types of connectors at 10 different locations.       2.…

    ans :-   Note:- (The Move command unavailable in my CATIA so I  not using )     Steps to be followed:       1. Download connector 3D data from www.te.com   DT06-4S DT06-6S DT06-2S DT06-08SA     2. Convecting the Mechanical part into the Electrical part for that I had followed the following steps.     For DT06-2S   …

  ans :-       P Clamp   The given clip was downloaded and opened as a part file. I have to define two points that will be used as entry and exit points. Then a plane has to be defined at the points. A base plane has to be defined at a distance of 2 to 3 mm from the clip. again we define the exit point at the first definition…

ans :-            INTRODUCTION TO WIRE HARNESS :-         DEFINIG ELECTRIC PARAMETER FLOW CHART          CONNECTOR DEFINATIONS IN CATIA V5     1. Deutsch DT06 – 08SA   Connector connection point:   Create midpoint on the…

  ans :-      Tooling axis :-   The tooling axis of the product tells us the direction of movement where the part is being produced effectively.       There are Some advantages if we follow the effective tooling axis like       The side cores and other things can be…

 1.ans :-     Tooling Axis:       The tooling axis of the product tells us the direction of movement where the part is being produced effectively.       There are Some advantages if we follow the effective tooling axis like       The side cores and other things…

Tooling Axis:       The tooling axis of the product tells us the direction of movement where the part is being produced effectively.       There are Some advantages if we follow the effective tooling axis like       The side cores and other things can be reduced.    …

1Ans:-                                                          Tooling Axis:                                       The tooling axis of the product tells us the direction of movement where the part is being produced effectively. There are Some advantages if we follow the effective tooling axis like The side cores and other…

        1.ans :-.     Tooling Axis:       The tooling axis of the product tells us the direction of movement where the part is being produced effectively.       There are Some advantages if we follow the effective tooling axis like       The…

      1.ans :-

        1.ans :-

        1.ans :-